Raised Long Vitrine

How this case is put together

Raised Long Vitrine is a island developed for jewelry boutiques, flagship stores and shop-in-shop projects. Jewelry retail asks for product that reads clearly under light and storage that closes securely at night. Cases in this range are detailed around the merchandise — tray layouts, glazing, shelf pitch and lockable drawers — and produced to the store drawing.

The outline is set by the store plan and sits as a counter unit with joinery detailed to read as one piece. Frame, panels and glazing are detailed together, so the case arrives as one coordinated unit rather than a cabinet with glass added afterwards.

Layout and configuration

The internal layout is built around how the merchandise is handled: what stays on open display, what sits behind glass, and what needs to be within reach of staff without leaving the counter.

• Locking access is specified at the door and drawer line, with keying and access levels agreed at approval.

Dimensions and fit

No stock size is quoted for Raised Long Vitrine. The case is dimensioned from your plan, the merchandise it holds and the clearance needed to open doors and drawers.

We return a drawing set with the width, depth, height, plinth, shelf pitch and glazing build-up marked. Production starts only after that drawing is signed off.

• Overall width, depth and height fixed on the approved drawing
• Shelf pitch and deck depth set to the merchandise
• Plinth height and aisle clearance checked against the floor plan
• Glazing thickness and door line confirmed on the drawing

Materials, glazing and light

The frame is specified in solid brass, 304 stainless steel or powder-coated steel, with E0 board with lacquer, veneer or PU leather for the body. Glazing is low-iron tempered glass with polished edges, and lighting is 3000K LED at CRI 90 and above, dimmable. Samples of frame and panel finishes are approved before the batch is released.

• Frame: solid brass, 304 stainless steel or powder-coated steel
• Body and panels: E0 board with lacquer, veneer or PU leather
• Glazing: low-iron tempered glass with polished edges
• Lighting: 3000K LED at CRI 90 and above, dimmable

Security, storage and service access

Storage is handled with soft-close drawers with removable velvet or suede trays. Cable routes, drivers and access panels are planned so maintenance does not require dismantling the display.

• Locking doors and drawers keyed to your access levels
• Concealed cable route from the base to each shelf position
• Removable panels for driver and hinge service

Where this case works

Raised Long Vitrine is specified for interior projects where the case has to meet a defined merchandising brief, not a catalogue role.

• Fine jewellery boutiques and flagship salons
• Department store jewellery halls and concessions
• Mall kiosks and central-aisle island positions
• Watch and jewellery multi-brand retail corners

What we need to quote

Send the store plan or a dimensioned sketch, the merchandise list, the power position and the finish direction. We reply with a drawing set, material samples and a production schedule.

• Floor plan or dimensioned sketch with the case position marked
• Merchandise list with the largest and heaviest items
• Power and data positions, plus any dimming requirement
• Finish direction and any brand hardware to be matched