Shoe Display Island

How this case is put together

Shoe Display Island is a footwear developed for apparel, footwear and accessory brands running multi-store programmes. Multi-store rollouts need fixtures that repeat exactly. We work from a single approved module and produce it in batches, so the third store matches the first in finish, hardware and dimensions.

The outline is set by the store plan and sits as a island unit with joinery detailed to read as one piece. Frame, panels and glazing are detailed together, so the case arrives as one coordinated unit rather than a cabinet with glass added afterwards.

Layout and configuration

The internal layout is built around how the merchandise is handled: what stays on open display, what sits behind glass, and what needs to be within reach of staff without leaving the counter.

• Concealed drawers keep spare stock out of the display and reduce handling on the shop floor.
• A freestanding body can be repositioned as the floor plan changes, with levelling feet for uneven floors.

Dimensions and fit

No stock size is quoted for Shoe Display Island. The case is dimensioned from your plan, the merchandise it holds and the clearance needed to open doors and drawers.

We return a drawing set with the width, depth, height, plinth, shelf pitch and glazing build-up marked. Production starts only after that drawing is signed off.

• Overall width, depth and height fixed on the approved drawing
• Shelf pitch and deck depth set to the merchandise
• Plinth height and aisle clearance checked against the floor plan
• Glazing thickness and door line confirmed on the drawing

Materials, glazing and light

The frame is specified in powder-coated steel, brushed metal or aluminium, with oak veneer, compact laminate or lacquered board for the body. Glazing is tempered glass shelves and vitrine tops where specified, and lighting is integrated shelf lighting with plug-and-play connectors. Samples of frame and panel finishes are approved before the batch is released.

• Frame: powder-coated steel, brushed metal or aluminium
• Body and panels: oak veneer, compact laminate or lacquered board
• Glazing: tempered glass shelves and vitrine tops where specified
• Lighting: integrated shelf lighting with plug-and-play connectors

Security, storage and service access

Storage is handled with stock drawers and back-of-house units on the same module. Cable routes, drivers and access panels are planned so maintenance does not require dismantling the display.

• Locking options available on doors and drawers
• Concealed cable route from the base to each shelf position
• Removable panels for driver and hinge service

Where this case works

Shoe Display Island is specified for interior projects where the case has to meet a defined merchandising brief, not a catalogue role.

• Apparel and footwear stores running multi-site rollouts
• Sportswear and lifestyle concept stores
• Handbag and accessory departments
• Mall pop-ups and temporary brand spaces

What we need to quote

Send the store plan or a dimensioned sketch, the merchandise list, the power position and the finish direction. We reply with a drawing set, material samples and a production schedule.

• Floor plan or dimensioned sketch with the case position marked
• Merchandise list with the largest and heaviest items
• Power and data positions, plus any dimming requirement
• Finish direction and any brand hardware to be matched