Reference image · Watch · Watch
Walnut Watch Cabinet
Sliding Glass Under-Counter Vitrine
- Clear glass display enclosure
- Wood veneer cabinetry
- Counter-height presentation surface
- Dimensions
- Set to your drawing
- Glass
- Tempered / low-iron
- Lighting
- Integrated LED
- Delivery
- Export crated
Overview
What this case is built for
Walnut Watch Cabinet is built for watch boutiques, department store corners and multi-brand salons. Sliding Glass Under-Counter Vitrine.
As with every watch project, dimensions, glazing, lighting and storage are fixed at the drawing stage. Watch presentation depends on angle and shadow. Cases in this range use tilt-adjustable trays, shadow-free lighting and metal details that hold up to daily handling at the counter.
Units are pre-assembled, lit and checked against the approved drawing before packing. Crating, packing lists and loading plans are prepared for the export route.
Detail references
Details shown are reference finishes from comparable builds; final hardware, glass and lighting are confirmed on the approved drawing.
Customisation options
Dimensions
Width, depth and height set from the store plan, in millimetres.
Materials
Metal frame, veneer, lacquer or leather matched to an approved sample.
Lighting
LED temperature, output and dimming specified for the merchandise.
Storage
Drawer layout, tray inserts and locks configured to the security brief.
Specification
- Dimensions
- Counter height and tray tilt set for seated or standing viewing.
- Glazing
- Low-iron tempered glass with polished edges; optional AR coating.
- Lighting
- Linear LED above the tray plus optional accent spots per position.
- Hardware
- Push-lock drawers, soft-close hinges, brushed or PVD metal.
- Finish
- Leather, microfibre or suede inserts with matched case finishes.
- Storage
- Removable watch trays and a separate lockable drawer bank.
- Hardware
- Locks, hinges and drawer runners specified to the security brief; keyed or push-lock options.
- Finish
- Metal, veneer, lacquer or leather matched to an approved sample before production.
- Storage
- Drawer and tray layout set to the merchandise, with removable inserts for display changes.
- Packing
- Export crating with corner protection, packing list and loading plan for the receiving store.
- Lead time
- Scheduled per project after drawing approval and material confirmation.
Product guide
Specification, materials and fit
Counter salons, island vitrines and wall cases with watch trays, directional lighting and lockable storage.
How this case is put together
Walnut Watch Cabinet is a watch developed for watch boutiques, department store corners and multi-brand salons. Watch presentation depends on angle and shadow. Cases in this range use tilt-adjustable trays, shadow-free lighting and metal details that hold up to daily handling at the counter.
The outline is set by the store plan and sits as a counter unit with joinery detailed to read as one piece. Frame, panels and glazing are detailed together, so the case arrives as one coordinated unit rather than a cabinet with glass added afterwards.
Layout and configuration
The internal layout is built around how the merchandise is handled: what stays on open display, what sits behind glass, and what needs to be within reach of staff without leaving the counter.
- Locking access is specified at the door and drawer line, with keying and access levels agreed at approval.
- Sliding glass runs on a tracked base, so the opening does not need clear aisle space in front of the case.
Dimensions and fit
No stock size is quoted for Walnut Watch Cabinet. The case is dimensioned from your plan, the merchandise it holds and the clearance needed to open doors and drawers.
We return a drawing set with the width, depth, height, plinth, shelf pitch and glazing build-up marked. Production starts only after that drawing is signed off.
- Overall width, depth and height fixed on the approved drawing
- Shelf pitch and deck depth set to the merchandise
- Plinth height and aisle clearance checked against the floor plan
- Glazing thickness and door line confirmed on the drawing
Materials, glazing and light
The frame is specified in brushed stainless steel, PVD or powder-coated steel, with lacquered board, veneer or leather-wrapped panels for the body. Glazing is low-iron tempered glass, optional anti-reflective coating, and lighting is linear LED above the tray with directional accent spots. Samples of frame and panel finishes are approved before the batch is released.
- Frame: brushed stainless steel, PVD or powder-coated steel
- Body and panels: lacquered board, veneer or leather-wrapped panels
- Glazing: low-iron tempered glass, optional anti-reflective coating
- Lighting: linear LED above the tray with directional accent spots
Security, storage and service access
Storage is handled with lockable drawer banks with removable watch trays. Cable routes, drivers and access panels are planned so maintenance does not require dismantling the display.
- Locking doors and drawers keyed to your access levels
- Concealed cable route from the base to each shelf position
- Removable panels for driver and hinge service
Where this case works
Walnut Watch Cabinet is specified for interior projects where the case has to meet a defined merchandising brief, not a catalogue role.
- Watch boutiques and mono-brand salons
- Department store watch departments
- Duty-free and travel retail counters
- Multi-brand watch and accessories stores
What we need to quote
Send the store plan or a dimensioned sketch, the merchandise list, the power position and the finish direction. We reply with a drawing set, material samples and a production schedule.
- Floor plan or dimensioned sketch with the case position marked
- Merchandise list with the largest and heaviest items
- Power and data positions, plus any dimming requirement
- Finish direction and any brand hardware to be matched
Enquiry
Quote this product for your store
Send the store plan and target quantity. We will confirm what changes for your dimensions, finishes and lighting.
Back to watch display cases